1.【Front and Rear Recording】MT1 motorcycle driving recorder incorporates NT96663 chip and two 200W front and rear lenses. Both front and rear cameras record at 1080p 30 fps to capture important moments 2【Super Night Version】The camera utilizes a SONY IMX 323 CMOS sensor which can record more clearly during the day or night. You can record audio while recording with the built-in microphone. The 2.7 inch LCD monitor has 3 modes: front camera / rear camera / front and rear simultaneously 3【Continuous & Loop Recording】Dash Cam is linked to the engine ON / OFF, and power is supplied directly from the battery of the motorcycle, so dash camera can record without charging. When the SD card is full, no need to change the SD card, just overwrite the old files automatically from loop recording. Supports up to 256GB micro SD cards 4【G-Sensor & Manual Lock】G-sensor technology automatically save footage when shake/collision, preventing the authentic video from being overwritten. Press the remote control button to manually lock the commemorative video 5【GPS module & Wi-Fi】You can decide whether or not to install the GPS module according to your needs. And if you want to share beautiful scenery while traveling, you can share it to various social platforms in real time through Wifi function. Product Specification: Model number: MT1 DSP: NTK 96663 Sensor: Front & rear camera IMX323 LCD: 2.7 inch LCD monitor Lens: Waterproof 6G glass Camera: Waterproof Body: non-waterproof (with waterproof rubber cover) Resolution: Front-1080P, Rear-1080P Video compression format: H.264 MOV Video output format: NTSC / PAL Light source frequency: 50Hz / 60Hz Speed unit: KM / H MPH Power: capacitor version WIFI: Support GPS: supported by GPS module RF control: support (wired remote control) Loop recording: 1 minute / 3 minutes / 5 minutes Emergency recording: G sensor Voice recording: support Display mode: Front camera / Rear camera / Front and rear simultaneous Motion detection: on / off Collision sensitivity: off / low / medium / high System language: 10 languages including English / Traditional Chinese / Japanese Note: You could find the detailed installation instructions in the manual: connect each component correctly according to the markings on the wires to prevent malfunction. The recorded video is in the positive direction when the recessed hole of the lens is facing up. The car camera is waterproof, but the body of the MT1 is not waterproof (with a waterproof rubber cover) The GPS module is perfect for receiving signals when cam installed the outside of the bike. While installing, please keep away from objects of metal parts to avoid affecting GPS signals Package Contents: 1 x MT1 body 2 x camera (with a 2.8M extension cable) 2 x metal base 2 x plastic base 1 x power cable 1 x USB cable 2 x adhesive tape (for camera base) 2 x round 3M adhesive tape 2 x magnet 8 x screw 2 x hex screw 1 x hex wrench 1 x sticker 4 x Velcro 1 x GPS module 1 x rubber cover (for waterproof and dust-proof) 1 x wired remote control 1 x User Manual