Notice: (1) This equipment is special for fireworks display. (2) Product instruction manual in English only (3) The battery is not included in the item.(4) The receiver could work with safety Talon igniter, but it must use 6LR61/9V battery. Feature: 1. 6 cue fireworks firing system: include 6 pcs receivers, one remote transmitter ETX200-6, one case. 2. The firing system has two fire modes. Single Fire, Sequential Fire(interval time 0.1S, 0.2S, 0.3S, 0.4S, 0.5S, 0.6S, 1.1S, 1.2S, 1.3S, 1.4S, 1.5S, 1.6S). If you buy a extra 12-buttons-transmitter(ETX2000-12) , it also has Salvo Fire and Step Fire. 3. Each receiver could fire 3-5 pcs e-match in parallel or 6-10 pcs e-match in series. If the receiver works with safety Talon igniter, please use 6LR61/9V battery. And it can only fire one safety Talon igniter. 4. The receiver is programmable, it learns the code of the transmitter with the button "Learn", if the receiver or the transmitter has some problem, it can be replaced with another. 5. The receiver learns the code of the transmitter to number the receivers in sequence. They are fired according to the sequence number while Sequential Fire 6. Test Function: The Test LED will be lit if the igniter is connecting well. 7. Short protection: The receiver can not be damaged by a short in cue. 8. Low voltage indication. 9. Transmitting Rang: 200 meters 10. Frequency: OOK, 433MHZ 11. Receiver size: 60x50x47mm 12. CE/ FCC Passed. 13. Power supply(not included in the item): Receiver: 9V battery Transmitter: 12V 23A battery 14. Four fire modes (1) Single Fire. Just fire the corresponding receiver according to the button of the transmitter which the receiver had learned. (2) Sequential Fire. Firstly, you should number the sequence of receiver while it learns the code of the transmitter, then choose which group it belongs to. The sequence number could be 1,2,3,.....48. Then press the button “1-6” of the transmitter, all the cues will be fired at a identical time interval. Switch the Function Switch of the receiver, you can set the interval time. (3) Step Fire(Must buy the extra transmitter ETX2000-12). Press the button “Step” of the transmitter to fire one by one from 1 to 12. it will fire according to the sequence number of the receiver. (4) Salvo Fire(Must buy the extra transmitter ETX2000-12). Press the button “All” of the transmitter to fire all the cues at the same time. NOTE: Please choose the color of the case. Manufacture:Emyplay Technology Co.,Ltd Manufacture Address:F2,Building B,Xixiang street,Baoan District, Shenzhen,China Manufacturer E-mail:sales@emyplay.com