Size:28cm*30cm Color : black white red yellow blue Sticker : Car Sticker Sticker Placement : The Whole Body Design : Animal Model : Animal Pattern Material Type : PVC Type Of Sticker : Car Body Type : Glue Sticker Item Type : Stickers Category : Stickers High temperature resistance, antifouling surface UV coating, rich luster, texture such as the car paint, waterproof sunscreen, do not fade, car washing will not affect, tear in addition to leave no resident Glue, do not hurt the car paint, distribution with turn film. Installation method: One : A small car with a transparent transfer film. The installation method (dry paste method): 1, clean body, keep dry. 2, determine to put position. In general, the side of the stick slowly, while whiletoolsevenness, while Jiedi paper. 3, if the graphics is not large, but also the transparent transfer of the film and stickers all torn off and then paste. But must be careful, do not happen accidental adhesion. 4, after the stick good, again repeated several times. In addition to the transparent transfer film. 5, on the door and sewn with a knife knife, inward bag Fu. 6, don't let the car body and any separation or projections. Two. A large car with a transparent transfer film installation method (wet sticking method): Tools: cloth, sprinkler, scraper or credit card 1, clean body, having uniform will be posted on the body parts of water - in order to reduce the viscosity of stickers, convenient adjustment. 2, to determine a good location. The need to stick to the side of the stick slowly, while gently whiletoolsevenness, while Jiedi paper. 3, meet the door handle or rubbing strips according to the material and cut into. 4, the appropriate adjustment, the general position of the graphics to determine the correct, repeated scratching the water and air bubbles. Tear off the transparent transfer film. 5, on the door and sewn with a knife knife, inward bag and obedient. 6, don't let the sticker and body have any separation or swelled. 7, as far as possible let's dry water in the sticker, conditional can moderate heat drying. According to the weather condition, then wash the car in a day or two. To decrease the difficulty of client installation we provide sticker have be good transfer membrane in advance. (except the whole piece of continuous graphics) & have spent How to remove: Use a nail gently will sticker edge blowing, and the tear, in addition to not leave marks also won't hurt the car paint. Winter if it is cold not blowing edge angle, hair dryer available will tape is heated properly, plastic melt soft can be removed easily. Matters needing attention : 1, a week before decided to dress up cars don't wax, wax will make sticker stick is not. Sticker pasted within three days after do not wash the car, don't tile in rainy day, so the effect will be bad oh! 2, such as stickers need to stick on the door or other need, also need not worry, good stick with a sharp knife cut open after. 3, if you do not want to do it yourself, please go to the local place to ask for help.