Specifications: Material: ABS Features: 1.This simulator is for diagnostic troubleshooting only. 2.if abnormal safety occurs when inserting the simulator, an alarm will be triggered. 3.this is very useful for the diagnosis of airbag SRS systems, suitable for most airbag SRS systems and suitable for most vehicles such as SUVs, off-road pickups. 4.make sure everything is working properly before connecting the new airbag. 5.airbag simulator, resistance inside, bypass real airbag. These simulators can be used to simulate the following: Driver airbag Front passenger airbag Side airbag Head airbag Knee airbag Belt tensioner Seat belt buckle pretensioner Each component of the SRS system with a gas generator Installation: They are very easy to use and are simply spliced into the two connectors that are normally connected to the driver's airbag. Please note: Most vehicles require the airbag computer to be reset or replaced to keep the airbag light off. Most frontal airbags for the driver (steering wheel) and front passenger (dashboard) have two inflators per airbag. You therefore need two simulators to simulate these airbags. These simulators are for diagnostic purposes only. Under no circumstances are they intended to replace a functioning airbag. Package List: 5 x Airbag Detector Notice: 1.The actual color of the project may be slightly different from the picture displayed on the website due to many factors such as the brightness of the display and the brightness of the light.I sincerely hope you can understand. 2.The size is manually measured, and there may be an error of 0.1-0.5cm, which is a normal phenomenon.