Ting Shen UL Seasonal-Use TS-8W29V (Replace TS-LU6W) LED Adapter, LED Driver, with 6ft Extension cord, LED Power Supply for 29-30V String lights Power Supply: DC 29V 0.28A Power Supply Model: TS-8W29V (Replace the old type TS-LU6W) Input: 120V～60Hz，0.16A Output: 29V 0.28A Rated Watts: 8W Four Steps for Selecting the Right LED Adapter to Match Your Christmas Lights If you need a new adapter to connect your lights but you are not sure which one is suitable for installation. Finding the best adapter can be a challenge since there are so many different models, types and manufacturers. These 5 steps will help you make the right decision. Step 1: Power Requirements First, consider the voltage requirements of your light. If your LED requires 29 volts to operate, use a 29-volt driver; if it uses 24 volts, use a 24-volt driver, etc. When choosing a driver for a constant-current LED, you must also consider the LED’s current output, which is measured in amps or milliamps. In short, make sure your driver will achieve power outputs within your light’s specified ranges: consider both voltage and current range for a constant-current driver, and simply voltage range for a constant-voltage driver. Step 2: Max Wattage Next, consider the wattage requirements of your light. Choose a driver with a max wattage higher than the wattage of your light. Do not pair a driver with a light that exceeds the driver’s maximum wattage or with a light that uses less than 50% of the driver’s maximum wattage. Step 3: Safety IP ratings tell users the environmental protection that a driver’s enclosure provides. Ting shen’s adapter can use indoor or outdoor, so whether your lights used indoor or outdoor, you can use it freely. Step 4: Connection Lastly, consider the connector requirements of your light. You need to make sure your lights plug (connector) can fit into the LED driver. If you need some help from seller, you can connect us freely.