Specification:
Material: Plastic & Metal.
Color: Black & Silver .
Distance: Up to 100 meters.
Size: 55 x 34 x 12 mm / 2.16" x 1.33" x 0.47" (LxWxH)
Feature:
1.Copy most radio fixed code remote controls
2.Selflearning remote control,easy to program your remote.
3.Four (4)Buttons to Operate 4 Different Garage Doors or Gates.
4.Mainly apply to car alarms, home alarms, panic buttons, garage door, rolling curtain, etc.
5.This 4channel rolling code remote control which can be used with many of the top garage and gate automation systems around the world.
This remote will also work with the following brands and models: V2 PHOENIX 2, V2 PHOENIX 4, V2 TSC2, V2 TSC4, V2 TRC2, V2 TRC4, V2 TXC2, V2 TXC4, V2 HANDY2, V2 HANDY4 433.92 MHz Rolling Code NICE FLO1RS, FLO2RS, FLO4RS 433.92 MHz Rolling Code NICE ERA ONE 1,2,4,9 channel 433.92 MHz Rolling Code NICE ERA INTI 1&2 channel 433.92 MHz Rolling Code DITEC GOL4, BIXLG4, BIXLS2, BIXLP2 433.92 MHz Rolling Code
How to Program Your Remote:
(1)Press and hold both "lock"unlock" together until LED quickly flashes 3 times. (2)Do not release both "lock"unlock" buttons,release and press "unlock" 3 times.LED will flash 3 times after this action. (3)Place the Original and Clone remotes together. (4)Press 1 button on the original remote which you want to copy and 1 button on the clone remote to which you want to copy simultaneously and hold them until LED flashes steadily on the clone remote. (5)Repeat step 3 and 4 to clone additional buttons to your clone remote.
Professional installation is Highly Recommended.
Note:
Operation instructions: Perform zeroing operation first, then copy
Zeroing operation: Press and hold two buttons on the remote control at the same time (A and B buttons on the remote control or the lock and unlock symbol buttons, etc.), the LED indicator flashes three times, release any button you pressed, and keep the other button pressed. Click the released button three times, and the LED indicator enters a fast flashing state. At this time, all the data in the memory is cleared. After the data is cleared, the LED indicator of the remote control will not light up no matter which button is pressed.
Copy operation: Hold the original remote control in one hand and the copy remote control in the other hand. The two remote controls are as close as possible (ideally, place the two remote controls side by side at zero distance on the desktop) and press the buttons you need to copy respectively. After the LED indicator flashes twice, it flashes slowly 3 times and finally stays on. The copy is successful. The operation methods of other buttons are the same. Some remote controls have low transmission power. The original remote control and the copy remote control should be operated back to back for copying.
Some operating environments have interference, so you should avoid interfering operations. If the copying doesn't work well, clear the code and copy again.
Packing List:
1 x Remote Control